| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN THE MACHINE ON AND PUSH THE BRUSH BUTTON TO LOWER THE BRUSH DECK. TURN MACHINE OFF.
|
| 2 |
|
SLIDE THE BRUSH OUT FROM BRUSH DECK.
|
| 3 |
|
REMOVE THE 5 SCREWS HOLDING THE BRUSH DECK COVER.
| Wrench-Allen metric 5.0mm |
|
|
| 4 |
|
REMOVE THE SCREW FROM THE BUMPER WHEEL.
| Wrench-Allen metric 5.0mm |
|
|
| 5 |
|
SLIDE THE BRUSH COVER FROM BRUSH DECK.
|
| 6 |
|
NOTE: THE BRUSH DECK HAS BEEN REMOVED FROM THE MACHINE FOR ILLUSTRATION PURPOSES ONLY. YOU WILL NOT NEED TO REMOVE THE BRUSH DECK. LOCATE THE 4 BRUSH BELT TENSIONERS ON THE BRUSH DECK. TURN BELT TENSIONERS TO CHECK FOR LOCKED UP CONDITION. IF THE TENSIONERS MOVE FREELY, THEY ARE NOT LOCKED UP. CHECK TENSIONERS TO MAKE SURE THEY ARENT LOOSE. IF BELT TENSIONERS ARE OKAY, REVERSE STEPS 2 THRU 5 TO REASSEMBLE THE MACHINE.
|